IL350 |
RFQ for IL350 Required Field |
 |
| Product | Manufacturers | Pack | D/C |
| IL350 | - | N/A | 03+ |
The IL350/1/8/9 family of Linear Optocoupler consist of an IRLED optically coupled to two photodiodes. The emitter mechanically faces both diodes enabling them to receive approximately an equal amount of infrared light. The diodes produce a proportional amount of photocurrents. The ratio of the photocurrents stays constant with high accuracy when either the LED current changes or the ambient temperature changes. Thus one can control the output diode current optically by controlling the input photodiode current.
The IL350/1/8/9 optocouplers can be used with the aid of operational amplifiers in closed loop conditions to achieve highly linear and electrically isolated AC and or DC signal amplifiers.
Typical Application |
Features |
| • Optical DAA for V.34 FAX/Modem PCMCIA Cards• Digital Telephone Line Isolation | • 2 mm High SMT Package• High Sensitivity (K1) at Low Operating LED Current• Couples AC and DC Signals• Low Input-Output Capacitance• Isolation Voltage, 2500 VRMS• Low Distortion |
| Emitter |
Sym |
Min. |
Max. |
Units |
| Reverse Voltage |
VR |
3 |
V | |
| Forward Current |
IF |
30 |
mA | |
| Surge Current Pulse Width <10s |
IPK |
150 |
mA | |
| Power Dissipation, TA=25°C |
PLED |
150 |
mW | |
| Dearate Linearly from 25°C |
2 |
mW/°C | ||
| Junction Temperature |
TJ |
100 |
°C | |
| Detector (each) | ||||
| Reverse Voltage |
VR |
15 |
V | |
| Power Dissipation |
P |
50 |
SupplierPost a Buying LeadPDF / DatasheetRelated PDFRelated Models | |
